STEINEL sensIQ S Specifications download pdf (Page 9)

- 17 -- 16 -

Troubleshooting

Malfunction Cause Remedy

Sensor without power

■ Fuse has blown; not

switched ON; break in wiring

■ Short circuit

■ New fuse, turn on power

switch, check wiring with

voltage tester

■ Check connections

Sensor will not switch ON

■ Twilight setting in night-time

mode during daytime

operation

■ Bulb faulty

■ Mains power switch OFF

■ Fuse faulty

■ Detection zone not correctly

adjusted

■ Adjust setting

■ Change bulb

■ Switch ON

■ Replace fuse, check

connection if necessary

■ Re-adjust

Sensor will not switch OFF

■ Continued movement within

the detection zone

■ Light is in detection zone

and keeps switching ON

as a result of temperature

change

■ Light being operated is in

the manual override mode

(LED ON)

■ Check zone and readjust if

necessary or fit shrouds

■ Adjust detection zone or fit

shrouds

■ Deactivate manual override

Sensor keeps switching

ON/OFF

■ Light being operated in the

detection zone

■ Animals moving in detection

zone

■ Adjust detection zone or fit

shrouds, increase distance

■ adjust zone, or apply

shrouds

Sensor responds when it

should not

■ Wind is moving trees and

bushes in the detection

zone

■ Cars in the street are

detected

■ Sunlight is shining on the

lens

■ Sudden temperature

changes due to weather

(wind, rain, snow) or air

expelled from fans, open

windows

■ Change zone

■ Mount sensor in a protected

place or change zone

■ Adjust detection zone or

install in a different place

Change in sensor's reach

■ Differing ambient

temperatures

■ Adjust reach by reach

controller 햻, if necessary

applying film shrouds 햽

Detector not responding

to remote control

■ Remote control not

programmed

■ Disconnect sensor from the

power supply for approx.

5 sec. Switch on the voltage

again and press the button

on the remote control within

10 min.

Functional Warranty

This Steinel product has been manufactured

with the utmost care, tested for proper opera-

tion and safety in accordance with applicable

regulations and then subjected to random

sample inspection. Steinel guarantees that it is

in perfect condition and proper working order.

The warranty period is 36 months and starts

on the date of sale to the consumer. We will

remedy defects caused by material flaws or

manufacturing faults. The warranty will be met

by repair or replacement of defective parts at

our own discretion. The warranty does not

cover damage to wear parts, nor does it cover

damage or defects caused by improper treat-

ment, maintenance or the use on non-genuine

parts. Further consequential damage to other

objects shall be excluded.

Claims under the warranty will only be

accepted if the light is sent fully assembled

and well-packed with a brief description of

the fault, a receipt or invoice (date of purchase

and dealer's stamp) to the appropriate Service

Centre.

Repair service:

If defects occur outside the

warranty period or are not

covered by warranty, ask

your nearest service station

for the possibility of repair.

Declaration of conformity

This product complies with

- Low-Voltage Directive 2006/95/EC

- EMC Directive 2004/108/EC

- RoHS Directive 2011/65/EC

- WEEE Directive 2002/96/EC

Operation/Maintenance

The infrared sensor can be used for switching

light ON and OFF automatically. The unit is not

suitable for burglar alarm systems as it is not

tamperproof in the manner prescribed for such

systems. Weather conditions may affect the

way the motion detector works. Strong gusts

of wind, snow, rain or hail may cause the light

to come ON when it is not wanted because

the sensor is unable to distinguish sudden

changes of temperature from sources of heat.

The detector lens may be cleaned with a damp

cloth if it gets dirty (do not use cleaning

agents).

Accessories

Corner wall mount:

Black: 4007841 608828

White: 4007841 608835

Stainless steel: 4007841 608804

SENSOR

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments

STEINEL sensIQ S Specifications Page 9

Comments to this Manuals

Related products and manuals for Motion detectors STEINEL sensIQ S